NiteBird Smart Bulb Won’t Connect? (Solved)
If you are having any trouble getting your NiteBird Smart Bulb connected to Wi-Fi, this article contains troubleshooting tips to help you resolve the issue.
So keep reading to see how to troubleshoot a ‘NiteBird Smart Bulb Won’t Connect.’
NiteBird Smart Bulb Won’t Connect
If your NiteBird Smart Bulb Won’t Connect, try any of the troubleshooting tips below to fix the problem:
1. Troubleshooting a NiteBird Smart Bulb that Won’t Connect to Wi-Fi
1. Check the Power Source
If your NiteBird Smart Bulb is not connecting to Wi-Fi, your smart bulb doesn’t have a good power supply. Check and ensure that your power outlet is not faulty.
If you’re not sure if your power source works, try another power outlet and see if your bulb gets powered. So, make sure your power outlet works and the bulb is powered up before connecting to Wi-Fi.
If the current being received is less than 100 volts, your bulb might not work. Likewise, if the current or volts exceed 240 volts, your device might malfunction. Therefore, ensure that you’re within 100V-240V when connecting to Wi-Fi.
Did this fix the problem? If not, continue the next troubleshooting guide.
2. Ensure You Have the Correct App
Before connecting to Wi-Fi, ensure that you have the correct app installed else, you won’t be able to get your device connected. There appears to be over one similar option of the app on Google Play.
Therefore, if you use an android device, ensure to match the app thumbnail to the one in your user manual to be sure. Once you have the correct app, open it and follow the instructions to add the bulb to the app.
The NiteBird Smart Bulb uses the Gosund app therefore, ensure that you download the correct Gosund app from your respective app store.
Now, try reconnecting back to Wi-Fi and see if this tip fixes the problem. If everything looks good, but you still have problems, continue to the next troubleshooting tip.
3. Check Your Network Signal
You need to ensure that your home or Wi-Fi network works else, your bulb will find it hard in connecting with your Wi-Fi network or router.
You can fix this by rebooting your router, as this will improve the network strength and the signal your bulb is getting from the router. When connecting to Wi-Fi, ensure your mobile, router, and Smart bulb are close by.
Remove all obstacles between your smart bulb and router. Add a Wi-Fi extender to improve the Wi-Fi signal strength. This will make it easier for better communication between all connected devices.
Do this and see if your bulb connects to Wi-Fi or check the next troubleshooting tip.
4. Ensure You are Not Running the 5GHz Network Band
The NiteBird Smart Bulb only supports the 2.4 GHz Wi-Fi network band. A lot of routers from an ISP are dual-band (2.4GHz and 5GHz) so you need a dedicated 2.4GHz router.
If you are using a dual-band router, you need to separate the network and ensure that your device is running only the 2.4 GHz network bandwidth.
You can log in to the router’s settings background to change the SSID of the two frequency bands, and separate the 2.4GHz network from the 5GHz network.
Set your network configuration mode to AP Mode during the setup because, in this mode, your smart bulb will always automatically find and connect to the 2.4GHz bandwidth.
5. Restore Default Settings
If everything else fails, reset your device to possibly fix any internal bug obstructing the Wi-Fi connection.
To reset your NiteBird Smart Bulb to default settings, follow these steps:
- Step 1: Turn the Bulb on/off three times in a row, wait for the bulb to flash quickly.
- Step 2: Turn the Bulb on/off three times in a row again and wait for the bulb to flash slowly.
NOTE: The NightBird Smart Bulb can be in two modes, which are Easy Mode and AP Mode.
Easy Mode: The device’s light is rapidly blinking for an easy, quick pairing setup.
AP Mode: Access Point mode is a secondary setup process in which the device’s light is slowly blinking and requires multiple steps for pairing. Follow the on-screen step-by-step instructions.
2. NiteBird Smart Bulb Not Connecting to App
One of the possible reasons why your NiteBird Smart Bulb is not connecting to the app is that you need to download the right app. There are several similar apps on Google Play and the App Store, so make sure you have the correct one. The NiteBird Smart Bulb uses the Gosund app, which you can download for Android devices and iOS devices on their respective app store.
Another possible reason is that your Wi-Fi network is not stable or compatible with the smart bulb. The NiteBird Smart Bulb only supports a 2.4 GHz Wi-Fi network band, so make sure you are not using a 5GHz band. You can check your router settings or contact your internet service provider to confirm this. You can also try rebooting your router or moving it closer to the smart bulb to improve the signal strength.
3. NiteBird Smart Bulb Not Connecting to Alexa
If you want to control your NiteBird Smart Bulb with Alexa voice commands, you need to link your Gosund account with your Alexa app. To do this, follow these steps:
- Open the Alexa app and tap on More in the bottom right corner.
- Tap on Skills & Games and search for Gosund.
- Tap on Enable to Use and enter your Gosund account information.
- Tap on Authorize and wait for Alexa to discover your smart bulb.
If you have already linked your Gosund account with your Alexa app, but your smart bulb is still not responding to voice commands, you can try these troubleshooting tips:
- Check if your smart bulb is powered on and connected to Wi-Fi.
- Confirm if your Alexa device is online and within hearing range.
- Check if you are using the correct name for your smart bulb. You can rename your smart bulb in the Gosund app or the Alexa app.
- Check if there are any updates available for your Gosund app or Alexa app, and install them if needed.
- Disable and re-enable the Gosund skill in the Alexa app, and rediscover your smart bulb.
4. NiteBird Smart Bulb Not Connecting to Google Home
If your smart bulb isn’t working, try these troubleshooting tips:
- Check if the bulb is powered on and connected to Wi-Fi.
- Ensure your Alexa device is online and within hearing range.
- Confirm that you’re using the correct name for your smart bulb. You can rename it in the Gosund app or Alexa app.
- Check if there are any updates available for the Gosund or Alexa app, and install them if needed.
- Disable and re-enable the Gosund skill in the Alexa app, and then rediscover your smart bulb.
NiteBird Smart Bulb Won’t Turn On
If your NiteBird Smart Bulb won’t turn on at all, there might be a problem with the power supply or the bulb itself. To troubleshoot this issue, you can try these steps:
- Check if your power outlet is working properly by plugging in another device and seeing if it works. You can also use a multimeter to measure the voltage output from the outlet.
- Check if you have installed the smart bulb correctly by following the instructions in the user manual. Make sure that the connection points are making contact and that there are no loose wires or screws.
- Check if there are any visible damages or defects on the smart bulb. If there are any signs of burning, cracking, or leaking, do not use the smart bulb and contact NiteBird customer service for a replacement.
5. NiteBird Smart Bulb Flickering
If your NiteBird Smart Bulb is flickering or flashing, it might be caused by a low or unstable voltage supply, a faulty dimmer switch, or a software glitch. To troubleshoot this issue, you can try these steps:
- Check if the voltage supply is within the range of 100V-240V. If it is too low or too high, it might affect the performance of the smart bulb. You can use a multimeter to measure the voltage output from the outlet or contact your electrician for assistance.
- Check if you are using a compatible dimmer switch with your smart bulb. The NiteBird Smart Bulb is not compatible with traditional dimmer switches, as they might cause flickering or damage the smart bulb. You can only use the Gosund app or voice commands to dim the smart bulb.
- Check if there are any updates available for your Gosund app or your smart device and install them if needed. Sometimes, updating the software can fix some bugs or glitches that might cause flickering.
6. NiteBird Smart Bulb Dimming
If your NiteBird Smart Bulb is dimming or not bright enough, it might be caused by a low or unstable voltage supply, the wrong color temperature setting, or a software glitch. To troubleshoot this issue, you can try these steps:
- Check if the voltage supply is within the range of 100V–240V. If it is too low or too high, it might affect the brightness of the smart bulb. You can use a multimeter to measure the voltage output from the outlet or contact your electrician for assistance.
- Check if you have selected the right color temperature for your smart bulb. The NiteBird Smart Bulb can change its color temperature from warm white to cool white, depending on your preference. You can adjust the color temperature in the Gosund app or by using voice commands.
- Check if there are any updates available for your Gosund app or your smart device, and install them if needed. Sometimes, updating the software can fix some bugs or glitches that affect the brightness.
7. NiteBird Smart Bulb Not Responding
If your NiteBird Smart Bulb is not responding to any commands from the app or voice assistants, it might be caused by a weak or interrupted Wi-Fi connection, a software glitch, or a hardware malfunction. To troubleshoot this issue, you can try these steps:
- Check if your smart bulb is powered on and connected to Wi-Fi. You can check the Wi-Fi status of your smart bulb in the Gosund app. If it shows offline, try rebooting your router or moving it closer to the smart bulb to improve the signal strength.
- Check if there are any updates available for your Gosund app or your smart device and install them if needed. Sometimes, updating the software can fix some bugs or glitches that might prevent communication between devices.
- Try resetting your smart bulb to its factory settings and then reconnecting it to the app or voice assistants. To reset your smart bulb, follow the same steps as mentioned above in the section “NiteBird Smart Bulb Not Connecting to App”.
Frequently Asked Questions:
How Many Nitebird Smart Bulbs Can I Control With One App or Voice Assistant?
You can control up to 50 NiteBird Smart Bulbs with one Gosund account. You can also group them into different rooms or scenes and control them together.
Can I Use Nitebird Smart Bulbs With Other Smart Devices or Platforms?
Yes, you can use NiteBird Smart Bulbs with other smart devices or platforms that are compatible with Gosund, such as IFTTT, Smart Life, Tuya, etc. You can create various automation scenarios and routines with these integrations.
How Long Do Nitebird Smart Bulbs Last and How Much Energy Do They Consume?
NiteBird Smart Bulbs have a lifespan of up to 30,000 hours and consume only 9W of power. They can save up to 80% of energy compared to traditional incandescent bulbs.
What Are the Benefits of Using Nitebird Smart Bulbs?
NiteBird Smart Bulbs can provide you with various benefits, such as:
- Enhancing your mood and atmosphere with different colors and brightness levels.
- Improving your sleep quality and health with sunrise and sunset modes.
- Increasing your security and convenience with remote control and scheduling features.
- Reducing your electricity bills and carbon footprint with energy-saving and eco-friendly features.
Does NiteBird work with Google Home?
Yes. NiteBird supports Google Home devices.
Conclusion
The above troubleshooting guidelines should help you fix the connectivity issues with your NiteBird Smart Bulb. Try all the guidelines to see which help you fix the problem.
If you still cannot get your NiteBird Smart Bulb connected to Wi-Fi, then you need to contact NiteBird customer support for help.
Also, note that the life expectancy of all NiteBird Smart Bulbs is 20000 hrs. You may replace your bulb if you’ve exceeded the 20000 hrs life expectancy.