Daybetter Led Strip Lights Full Troubleshooting Guide: Quick Fix - FixTechPoint.com: Smart Device Solution Arena

Is your Daybetter LED Strip Light not working as expected? Is it not turning on, not syncing, not connecting, responding, or not changing colors and other problems that’ll be covered in this guide? If you are facing any of these problems with your Daybetter LED strip lights, don’t worry, this guide got you covered.

In this guide, I will show you how to troubleshoot and fix some common issues with your Daybetter LED strip lights. If you follow the tips in this guide, you should be able to enjoy your lights in no time.

So, let’s get started with the Daybetter LED strip lights full troubleshooting guide.

Table of Contents

Daybetter LED Strip Lights Not Turning On

If your LED Strip Light is not turning on, try the following troubleshooting tips to fix the problem:

Check if the power adapter is plugged into a working outlet and if the cord is intact. If not, replace it with a new one.
Ensure the controller box is connected securely to the power adapter and the LED strip lights. Make sure the arrows on the connectors are aligned. If the controller box is damaged, replace it with a new one.
Check if the remote control has enough battery and is working properly. You can test it by pointing it at a camera and pressing any button. The remote is working if you see a red light on the camera. If not, replace the battery or the remote.
Check if the LED strip lights are cut or damaged. If they are, you may need to solder them back together or replace them with new ones.

Daybetter LED Strip Lights Not Syncing

If the Strip Light is not syncing, do the following to fix the issue:

First, this may be due to network issues. Check your router to ensure that it is working properly. Next, restart the router to refresh the network. Check if the light is syncing or continue to the next tip.
Ensure the LED strip lights are connected securely and correctly. Ensure the arrows on the connectors are aligned and there are no loose wires. If you have multiple LED strip lights, make sure they are close enough to each other and that there are no gaps or bends between them.
Check if the microphone on the controller box is working properly and is not blocked by anything. You can test it by tapping it lightly and seeing if the lights react. If not, you may need to replace the controller box with a new one.
Check if the music source is loud enough and close to the controller box. You can adjust the volume of the music source or move it closer to the controller box. You can adjust the microphone’s sensitivity on the App by sliding the bar left or right.

Daybetter LED Strip Lights Not Connecting to App

To fix this issue, you can try the following solutions:

Check if the App is compatible with your device or operating system. Ensure you’re using the correct App; check your user manual for the correct One compatible with your LED Lights.
Ensure the App is updated to the latest version. You can check for updates on Google Play or App Store and install them if available.
Check if the Wi-Fi network is stable and is connected to your device. You can check the Wi-Fi signal strength on your device and make sure it is strong enough. You can also try switching to another Wi-Fi network or restarting your router.
Ensure your device’s Bluetooth function is enabled and paired with the controller box. You can check your device’s Bluetooth settings and ensure it is turned on and visible. You can also try unpairing and pairing again with the controller box.

Daybetter LED Strip Lights Not Connecting to Wi-Fi

If your Strip Light is not connecting to Wi-Fi, do the following:

Check if the Wi-Fi network is stable and compatible with your controller box. You can check the Wi-Fi signal strength on your device and make sure it is strong enough. You can also try switching to another Wi-Fi network or restarting your router.
Check if the Wi-Fi password is correct and has not changed. You can check your device’s Wi-Fi settings and ensure you have entered the correct password. You can also try resetting the password on your router or contacting your internet service provider for assistance.
Check if the controller box is close enough to the router and has no interference from other devices. You can move the controller box closer to the router and away from any metal objects, walls, or other electronic devices that may cause interference.

If the issue persists, contact the Daybetter support team for further assistance.

Daybetter LED Strip Lights Not Controlled by Alexa

If Alexa does not control your Daybetter LED Strip Lights, do the following:

Check if the Alexa device is connected to Wi-Fi and is online. You can check the device’s status on the Alexa app and ensure it is green and not red. You can also try restarting the device or resetting it to factory settings.
Check if the Alexa App is updated to the latest version. You can check for updates on Google Play or App Store and install them if available.
Ensure the Daybetter LED strip lights are added to the Alexa App. You can follow the instructions on the App to add your lights and give them a unique name. You can also try renaming your lights or deleting and adding them again.
Check if the voice commands are clear and your voice is recognizable. You can check the list of voice commands on the App. You can also try speaking louder, slower, or more clearly.

Daybetter LED Strip Lights Not Controlled by Google Home

If Google Home does not control your Daybetter LED Strip Lights, do the following:

Check if the Google Nest Speaker is connected to Wi-Fi and is online. You can check the device’s status on the Google Home App and ensure it is green and not red. You can also try restarting the device or resetting it to factory settings.
Check if the Google Home App is updated to the latest version. You can check for updates on Google Play or App Store and install them if available.
Ensure the Daybetter LED Strip Lights are added to the Google Home App. You can follow the instructions on the App to add your lights and give them a unique name. You can also try renaming your lights or deleting and adding them again.
Check if the voice commands are clear and your voice is recognizable. You can check the list of voice commands on the App. You can also try speaking louder, slower, or more clearly.

Daybetter LED Strip Lights Not Working

If your Daybetter LED Strip Lights are not working, try the following tips to troubleshoot:

Check if the LED Strip Lights are overheated. You can check the lights’ temperature and ensure they are not too hot to touch. You can also check the lights’ power rating and ensure they do not exceed the maximum voltage or current.
Ensure the LED Strip Lights are exposed to water or moisture. Check the environment of the Lights and make sure they are not in contact with any liquid, humidity, dirt, or direct sunlight.
Check if the LED Strip Lights are defective or have a short circuit. Ensure the Lights are not damaged, broken, or burned out. You can also check the lights’ wiring and ensure no loose connections.

If the Light is not damaged and everything looks good, contact the Daybetter support team for further assistance.

Daybetter LED Strip Lights Not Pairing with Remote

To fix this issue, you can try the following solutions:

Ensure the remote is working properly. You can test it by pointing it at a camera and pressing any button. The remote is working if you see a red light on the camera. If not, replace the battery or the remote.
Check if the remote control is in range or is blocked by something. Ensure nothing is blocking the signal between the remote control and the controller box, such as walls, furniture, or other devices.

If the issue persists, contact the Daybetter support team for further assistance.

Daybetter LED Strip Lights Not Dimmable

If your Daybetter LED Strip is not Dimming, you can try the following troubleshooting tips:

Check if the dimming function is enabled on the app or the remote control. You can check the app’s settings and ensure the dimming mode is on. You can also check the remote control buttons and ensure you are pressing the correct ones to adjust the brightness.
Confirm if the brightness level is already at the lowest or highest setting. You can check the display on the app or the remote control and ensure you are not at the minimum or maximum brightness. You can also try increasing or decreasing the brightness by sliding your finger on the app or pressing the buttons on the remote control.
Check if the LED strip lights are compatible with the dimming function. You can check your LED Strip Lights lights’ product description and ensure they support dimming. If not, you may need to replace them with dimmable ones.

Daybetter LED Strip Lights Not Responding

If your Daybetter Strip Lights is not responding, do the following:

Ensure the LED strip lights are receiving enough power or are damaged. You can check the power adapter and ensure it is plugged in properly and is not faulty. You can also check the LED strip lights and make sure they are not cut, broken, or burned out.
Check if the controller box is working properly. Remove the controller box by unplugging it from the power source and plugging it back in after a few seconds.
Check if the App, the remote control, or your voice assistant device is working properly and connected to the App. You can try closing and reopening the App to see if this fixes the problem.

If the issue persists, they may be an issue with the Strip Lights. Contact the Daybetter support team for further assistance.

Daybetter LED Strip Lights Not Changing Colors

To fix this issue, try the following troubleshooting tips:

Ensure the color mode is selected on the App or the remote control. You can check the settings on the App and make sure you have chosen the color mode you want, such as solid, gradient, or scene. You can also check the remote control buttons and ensure you press the correct ones to change the color mode.
Check if the color temperature is too high or too low. You can check the App settings and ensure you have adjusted the color temperature to your preference, from warm to cool. You can also check the remote control buttons and ensure you press the correct ones to change color.
Ensure the LED strip lights are compatible with the color mode. You can check your LED strip lights’ product description and ensure they support the color mode you want. If not, you may need to replace them with ones that do.

Daybetter LED Strip Lights Not Responding

If your Daybetter Strip Lights is not responding, do the following:

Ensure the LED strip lights receive enough power or are damaged. You can check the power adapter and ensure it is plugged in properly and is not faulty. You can also check the LED strip lights and make sure they are not cut, broken, or burned out.
Check if the controller box is working properly. Remove the controller box by unplugging it from the power source and plugging it back in after a few seconds.
Check if the App, the remote control, or your voice assistant device is working properly and connected to the App. You can try closing and reopening the App to see if this fixes the problem.

If the issue persists, they may be an issue with the Strip Lights. Contact the Daybetter support team for further assistance.

Daybetter LED Strip Lights Not Changing Colors

To fix this issue, try the following troubleshooting tips:

Ensure the color mode is selected on the App or the remote control. You can check the settings on the App and make sure you have chosen the color mode you want, such as solid, gradient, or scene. You can also check the remote control buttons and ensure you press the correct ones to change the color mode.
Check if the color temperature is too high or too low. You can check the App settings and ensure you have adjusted the color temperature to your preference, from warm to cool. You can also check the remote control buttons and ensure you press the correct ones to change color.
Ensure the LED strip lights are compatible with the color mode. You can check your LED strip lights’ product description and ensure they support the color mode you want. If not, you may need to replace them with ones that do.

Daybetter LED Strip Lights Won’t Turn Off

If your Daybetter LED strip lights don’t turn off, there are a few things you can check to try to fix the issue:

Check the Power Adapter.

Make sure that the power adapter is plugged in and turned on.
Try unplugging the power adapter from the outlet and plugging it back in after a few seconds.

Try using a different outlet or replacing the power adapter with a new one.

2. Check the LED Strip Lights.

Ensure the LED strip lights are properly connected to the power adapter.
Try cutting off the power supply to the LED strip lights by disconnecting them from the controller box or cutting them at the marked points.

If you have tried all the above and your LED strip lights still won’t turn off, you may need to contact Daybetter customer support for assistance.

Daybetter LED Strip Lights Not Showing Up in App

To fix this issue, you try the following tips:

Check if the app is updated to the latest version and is compatible with your device and operating system. You can check for updates on Google Play or App Store and install them if available.
Check your network connection to see if it’s working properly and connected to your device. Try switching to another Wi-Fi network or restart your router and try reconnecting again.
Ensure you’re using the correct controller box. You can check your controller box’s model number and ensure it matches your LED strip lights.

If the issue persists, reset the Light or contact Daybetter customer service for assistance.

Daybetter LED Strip Lights Not Recognizing Lights

To troubleshoot and fix this problem, do the following:

Check the power supply. Make sure that the power supply is plugged in and turned on. You can also try using a different power supply to see if that resolves the issue.
Ensure the connections and confirm that the Lights are properly connected. If using a remote control, ensure the remote points directly to the IR receiver.
Make sure you have a stable internet connection. Also, check the app and make sure it’s updated.

How to Factory Reset Daybetter LED Strip Lights

To restore your Daybetter LED Strip Lights to their factory default settings, do the following:

Unplug the power adapter from power and wait for about 10 seconds, then plug it back into power.
Ensure your controller box and LED strip lights are connected and powered on.
Press and hold the power/reset button on the controller box for 10 seconds until the Light starts flashing.
Once the Light starts to flash, wait for it to stop.
Open the Apollo app on your device and follow the instructions to set up your LED strip Lights again.

What App Do I Need for Daybetter Led Lights?

You can use the “Apollo” Lighting App for Bluetooth enabled Light strips and “Tuya Smart App” if your device is Wi-Fi enabled or IR. You can also try the “Magic Home” App to see if it works.

How Long Do Daybetter Lights Last?

The durability of the Light Strips depends on different factors ranging from usage, Voltage, heat, and exposure to water. Considering that, the LED Light may last for 30000-50000 hours.

Can Daybetter Led Lights Connect to Music?

Yes. You can connect the Lights to your Music using the music sync function. This way, the Strip light syncs with your Music and changes with the beat of the Music.

Conclusion

If you followed this article carefully, this guide should have helped you troubleshoot and fix the issues with your Daybetter LED strip lights, and you should be able to enjoy your lights without any hassle.

However, if you still encounter any problems not covered in this guide or have any questions or feedback, contact Daybetter customer service, and they will be happy to assist you with any issues or inquiries.