Lxyoug LED Strip Lights Full Troubleshooting Guide: Easy Fix

If you want to add color and ambiance to your home, office, or party, you might have considered using Lxyoug LED strip lights.

However, like any other electronic device, Lxyoug LED strip lights may encounter some problems from time to time. This can be frustrating and annoying, especially when you want to enjoy your lights. Fortunately, simple troubleshooting steps can fix most of these problems quickly.

This article will guide you through some steps and tips to help you resolve your Lxyoug LED Strip Lights issues. So if you’re ready, let’s dive in!

Lxyoug LED Strip Lights Not Connecting

Lxyoug LED Strip Lights Not Turning On

If your Lxyoug LED Strip Lights not turning On? Try the following tips to troubleshoot:

  • Ensure your Lights are plugged into a working outlet and have enough voltage and current to power your lights. You can use a multimeter to test your power supply or try another one compatible with your lights.
  • Ensure that all the wires and connectors are securely attached and that there are no loose or broken parts. You can use a wire stripper to expose and reconnect the copper wires if needed. You can also use electrical tape to insulate the wires and prevent short circuits.
  • Make sure that your controller is working correctly and that it is sending signals to your lights. You can use that remote or App to test your controller to see if it’s working correctly.

If the problem persists, contact the Lxyoug support team for help.

Lxyoug LED Strip Lights Not Syncing

If your Strip Lights are not Syncing, try the following troubleshooting tips:

  • Ensure your lights are in music mode and compatible with the sound source. You can use the remote or the App to switch between different music modes, such as dynamic, rhythm, or spectrum. You can also adjust the brightness and speed of your lights according to the music.
  • Ensure that your lights pick up the sound from your microphone and that it is loud enough for them to sync. You can use the remote or the App to adjust the microphone sensitivity of your lights and make them more or less responsive to the sound.
  • Ensure that your App is working properly and connected to your lights and your sound source. You can use the App to scan for your Lights and pair them with your Bluetooth device. You can also use the App to customize your lights and choose different effects, colors, and patterns.

If none of the tips above worked, contact the Lxyoug support team for further assistance.

Lxyoug LED Strip Lights Not Connecting to App

If your Lights are not connecting to the App, here are some things you can do to fix this problem:

  • Make sure that your Bluetooth is turned on and that it is within range of your lights. You can use your device’s settings to turn on Bluetooth and scan for nearby devices. You can also try restarting your device or resetting your Bluetooth settings if they are not working correctly.
  • Confirm that the App is compatible with your device and your lights. You can use the app store to download the latest version of the App or check for updates if you already have it installed. You can also try uninstalling and reinstalling the App if it is not working correctly.
  • Give the App access to your device’s features, such as Bluetooth, microphone, camera, location, etc. You can use your device’s settings to grant or revoke permissions for different apps. You can also try clearing the App’s cache or data to see if this helps.
Related Post:  Phopollo Strip Lights Troubleshooting: + Full Set up Guide

If the issue persists, contact the Lxyoug support team for further assistance.

Lxyoug LED Strip Lights Not Connecting to Bluetooth

If your Lxyoug LED Strip Light is not connecting to Bluetooth, try the following tips to fix the problem:

  • Make sure that your Bluetooth device is working correctly and that it is compatible with your lights. You can use another Bluetooth device to test your device or try replacing its battery if it is low. You can also try resetting your device or updating its firmware.
  • Ensure that your Bluetooth device is close enough to your lights and that there are no obstacles between them. You can use a ruler or a tape measure to measure the distance between your device and your lights and ensure it is within 10 meters (33 feet). You can also try moving your device or your lights closer together or changing their position if they are not connecting well.
  • Ensure there are no other devices or sources of interference near your Bluetooth device or your lights. You can use a frequency scanner or an app to detect any interference in your area and avoid them if possible. You can also try turning off other devices or moving them away from your Bluetooth device or your lights if they are causing interference.

If the issue persists, contact the Lxyoug support team for further assistance.

Lxyoug LED Strip Lights Not Working

If your Lxyoug LED strip lights are not working at all or partially. Several factors, such as a damaged LED strip, a wrong cut mark, or a poor solder joint, can cause this. Here are some things you can do to fix this problem:

  • Check the LED strip to ensure it is not damaged or burned out and has enough LEDs to light up properly. You can use a multimeter to test each LED to your lights or change your remote’s angle if they are not pairing well.
  • Ensure that your Lxyoug LED Strip Light is receiving power. Make sure the socket or outlet is working. Try another outlet to confirm the LED Strip Light is working; if it does, you must change the outlet.
  • Confirm that the App, Controller, and remote control work perfectly. If they are not, your device may not work.

Lxyoug LED Strip Lights Not Dimmable

Here are some things you can do to fix this problem:

  • Ensure that your lights are in dimming mode and compatible with your dimmer. You can use the remote or the app to switch between different dimming modes, such as smooth, flash, or strobe. You can also adjust the brightness and speed of your lights according to your preference.
  • Ensure your Lights are at the desired dimming level and not too bright or dim. You can use the remote or the app to adjust the dimming level of your lights and make them more or less bright.
  • Check if your Lights are working correctly and not flickering or flashing when you Dim them. You can use a multimeter or a LED strip light tester to test your lights or replace them if they are faulty. You can also use a dimmer switch to control your lights to see if this helps.
Related Post:  Kapebow Light Star Projector Troubleshooting & Set Up Guide

If the issue persists, contact the Lxyoug support team for further assistance.

Lxyoug LED Strip Lights Not Responding

If your Lxyoug LED strip lights are not responding to your commands or they are lagging or freezing, here are some tips you can do to fix this problem:

  • Ensure the LED strip is connected to the power supply and the controller. Check for any loose or damaged wires.
  • Stay within the maximum power output of the power supply, and make sure you’ve stayed within 24 volts or 36 watts. If you’re below or above this, your lights may not respond. Also, avoid using extension cords with the LED strip.
  • Power cycle the Lights by removing them from power. Wait for at least 60 seconds before putting it back in power. You can also turn the Lights off using the Circuit breaker or Switch.

If the problem persists, contact the Lxyoug support team for help.

Lxyoug LED Strip Lights Not Changing Colors

If your Lights are not changing Colors, here are some troubleshooting tips you can do to fix this problem:

  • Ensure that your Lights are in color mode and compatible with your color changer. You can use the remote or the app to switch between different color modes, such as solid, gradient, rainbow, or scene.
  • Ensure that your lights are at the desired color temperature and are not too warm or too cool. You can use the remote or the app to adjust the color temperature of your lights and make them more or less cool.
  • Ensure the connection frequency is manageable and compatible with your controller or app. You can use the remote or the app to adjust your connection frequency and make it more or less.

If you still have issues, contact the Lxyoug support team for help.

Lxyoug Led Strip Lights Keeps Disconnecting

If your Lxyoug LED strip lights keep disconnecting, here are a few troubleshooting steps you can take to fix the issue:

  • Ensure that your Lights have a stable power supply. If the Power is not stable, the Lights will keep disconnecting.
  • Check the pin connections to ensure they are inserted correctly. Also, Ensure the dimmer switch is compatible with the LED strip lights if you’re using one
  • Confirm that the power supply’s voltage and current rating are compatible with your LED strip lights
  • Ensure the cables from the power supply to the LED strip lights are connected and not loose. If you’re using the App, make sure you’re within the range of the Strip Light and controller.

If the issue persists, contact the Lxyoug support team for further assistance.

Lxyoug LED Strip Lights Won’t Turn Off

If your Lights don’t turn off, do the following troubleshooting tips to fix this problem:

  • Make sure that your power switch is working correctly and that it is turning off your Lights. You can use a multimeter or a power tester to test your power switch or try replacing it with a new one that works with your Lights.
  • Ensure that your timer setting is correct and that it is not keeping your lights on for longer than you want. You can use the remote or the App to adjust your timer setting and make it more or less long.
  • Check to confirm that your power consumption is not too high and within your power supply’s capacity. You can use a wattmeter to measure your power consumption and compare it with your Lights power supply’s rating. You can also try reducing the brightness or speed of your lights or using fewer lights if they consume too much power.
Related Post:  Reemeer LED Strip Lights Full Troubleshooting Guide: Easy Fix

If the Lights still won’t turn off, try cutting power to the Strip by turning off power from the circuit breaker or junction box, and your Lights should go off.

Lxyoug LED Strip Lights Not Showing Up in App

If your Lights don’t show up in the App, try the following tips to troubleshoot:

  • Ensure that your app version is up to date and supports your lights. You can use the app store to check for updates or download the latest version of the App if you don’t have it installed. You can also try uninstalling and reinstalling the App if it is not working correctly.
  • Confirm that you’re using the correct App, which is the “Lotus Lantern App.” If you’ve been using something else, delete it, install the App from your App Store, and set up your Lights in the App.
  • Make sure the App has detected all of your lights. You can use the app scan function to scan for nearby devices and pair them with your App. You can also try moving your device closer to your lights or changing its position if they are not showing up in the App.

If the issue persists, contact the Lxyoug support team for further assistance.

Lxyoug LED Strip Lights Not Recognizing Lights

If your Lxyoug LED strip lights are not recognizing the lights, it is likely due to a problem with the controller. Here are some troubleshooting steps you can try:

  • Check the connections to ensure the LED strip is connected to the controller. Check for any loose or damaged wires.
  • Ensure you’re using the correct App (Lotus Lantern App)to set up your Lights. The App is available for download on the App Store and Google Playstore.
  • The controller App may need to be updated with the latest firmware. You can check the App Store for Updates.

If the issue persists, you’ll need to reset your Strip Lights. Follow the instructions below to reset your Lights to its factory default settings.

How to Factory Reset Lxyoug Led Strip Lights

If none of the troubleshooting steps above work for you, you may need to factory reset your Lxyoug LED strip lights. This will erase all your settings and preferences and restore your lights to their default settings.

  1. Turn off the LED strip lights and unplug them from the power source.
  2. Press and hold the reset button on the controller or the reset hole for 8 seconds using a paper clip or a similar tool.
  3. Release the button or remove the paper clip and wait for the LED Strip Lights to Light up.

 

Conclusion

Lxyoug LED strip lights are amazing products that transform any space into a colorful and lively environment. However, they may also encounter problems affecting their performance and functionality.

In this article, I have provided solutions to some problems you may be having with your Lxyoug LED Strip Lights. I hope this article has helped you troubleshoot your Lxyoug LED strip lights issues and enjoy your lights better.