BlissLights Sky Lite Evolve Troubleshooting & Set Up Guide

Are you experiencing issues with your BlissLights Sky Lite Evolve Galaxy Light Projector? Are you having trouble setting it up or did it suddenly stop working? Don’t worry, this article is here to provide answers and solutions.

In this guide, you will learn how to connect the BlissLights Sky Lite Evolve Galaxy Light Projector to the BlissHome app and Alexa, as well as how to set up the device. Additionally, you’ll find troubleshooting tips to help you fix any issues you may encounter during setup or while using the projector.

BlissLights Sky Lite Evolve Not Connecting to BlissHome App, Wifi, Alexa and Bluetooth

Without further ado, let’s get started with setting up and fixing any issues you may be experiencing!

How to Setup Blisslights Sky Lite Evolve Galaxy Light Projector

Here are the steps to connect your Blisslights Sky Lite Evolve Galaxy Light Projector:

Step 1: Unbox your Blisslights Sky Lite Evolve Galaxy Light Projector and ensure that all the components are included in the package.

Step 2: Choose a suitable location for the projector, preferably a flat surface such as a table or a shelf, and make sure that it is at a suitable distance from the ceiling or wall.

Step 3: Plug the power cord into the projector and plug the other end into a power outlet. You can also use the included USB cable to power the projector if you prefer.

Step 4: Press the power button to turn on the projector. You should see the projection immediately.

Step 5: Use the remote control to adjust the brightness and speed of the galaxy light projection. You can also choose from different color options and effects.

To change the projection angle, adjust the adjustable stand at the base of the projector.

 

How to Connect BlissLights Sky Lite Evolve Galaxy Light Projector to Wi-Fi

Here’s how to setup your BlissLights Sky Lite Evolve Galaxy Light Projector to your Wi-Fi network:

Step 1: Download the BlissHime app which is available for free from the App Store or Google Play Store or simply scan the QR code on the user manual to download the app.

Step 2: Tap the “+”button on the App to add the device. On the “Add device” page, select the category of the device.

Step 3: Put the device into Pairing Mode by pressing the reset button for 5 seconds. The indicator light should flash rapidly to indicate its readiness for setup.

Step 4: Tap “Confirm the Indicator light is blinking” and tap next to connect to your Wi-Fi network.

Step 5: Select the 2.4GHz Wi-Fi and enter your Wi-Fi name and the Wi-Fi password to connect the device to the network.

Step 6: Wait for the app to scan for your device and register it to the cloud.

BlissLights Sky Lite Evolve Galaxy Light Projector Not Connecting to Wi-Fi

If you have issues connecting your BlissLights Sky Lite Evolve Galaxy Light Projector to Wi-Fi, try the following tips to troubleshoot:

  • Ensure that the device is properly powered on, as without power, the device will not be able to connect to the Wi-Fi network. Additionally, check whether the device is in pairing mode. If the device is not in pairing mode, reset to put it in pairing mode.
Related Post:  Philips Hue Light Strip Troubleshooting: + Full Set up Guide

 

  • Make sure that the device, the phone and the router are close to each other to establish a strong Wi-Fi signal.

 

  • Ensure that you’re entering the correct password for the Wi-Fi network. Incorrect passwords will prevent the device from connecting to the network.

 

  • If you’re connecting to your Wi-Fi network via the 5GHz band, you’ll have issues so ensure that you’re connecting to the 2.4GHz Wi-Fi network band.

 

  • Make sure the Wi-Fi broadcast function is broadcasting and not set to hidden mode, which means the Wi-Fi network name will be visible to the device, making it easier to connect to the correct network.

If none of the tips above worked, reach out to the BlissLights customer support team for further assistance.

How to Connect BlissLights Sky Lite Evolve Galaxy Light Projector to BlissHome App

Here’s how to setup your BlissLights Sky Lite Evolve Galaxy Light Projector with the BlissHome App:

Step 1: Download the BlissHime app which is available for free from the App Store or Google Play Store or simply scan the QR code on the user manual to download the app.

Step 2: Tap the “+”button on the App to add the device. On the “Add device” page, select the category of the device.

Step 3: Put the device into Pairing Mode by pressing the reset button for 5 seconds. The indicator light should flash rapidly to indicate its readiness for setup.

Step 4: Tap “Confirm the Indicator light is blinking” and tap next to connect to your Wi-Fi network.

Step 5: Continue other in-app instructions to finish connecting your BlissLights Sky Lite Evolve Galaxy Light Projector to the BlissHome App.

BlissLights Sky Lite Evolve Galaxy Light Projector Not Connecting to BlissHome App

If you’re having issues connecting your BlissLights Sky Lite Evolve Galaxy Light Projector to the BlissHome App, try the following tips to fix the problem:

  • Ensure that the device has power and is in pairing mode, without power, the device will not be able to connect to the BlissHome App. Additionally, check whether the device is in pairing mode. If the device is not in pairing mode, reset to put it in pairing mode.

 

  • Ensure that Wi-Fi, Bluetooth and Location services are turned on. This helps the BlissHome App to locate and connect to your device easily. Also, ensure that your device is connected to a good Wi-Fi network.

 

  • Change the configuration mode from EZ to AP mode at the top right corner of the page. Reset the device and make sure that it is blinking slowly then go over the steps to connect your device to the BlissHome App again.

 

  • Try setting up using another mobile device. Download the BlissHome App on that mobile device, ensure that your mobile phone’s network is working smoothly, and then reconnect the device to your new mobile phone.

If none of the tips above helped in connecting your device to the BlissHome App, reach out to the BlissLights customer support team for further assistance.

How to Connect BlissLights Sky Lite Evolve Galaxy Light Projector to Alexa

To setup your BlissLights Sky Lite Evolve Galaxy Light Projector to Alexa, try the following setup steps:

Step 1: Complete connecting your device to the BlissHome App following the in-app instructions or the setup steps above.

Step 2: Download the Amazon Alexa app from the Playstore or the iOS app store and log in with your Amazon account.

Step 3:  Choose a suitable location for the projector, preferably a flat surface such as a table or a shelf, and make sure that it is at a suitable distance from the ceiling or wall. Power on the Projector.

Step 4: Open the Alexa app, and tap on the three straight lines at the top of the page to access the Menu options.

Step 5:  Tap on “Skills” in the Alexa App menu.Then search for “BlissHome” and select it from the search results.

Step 6: Tap “Enable” to enable the skill and then you’ll be redirected to the app binding page.

Related Post:  Keelixin LED Strip Lights Full Troubleshooting Guide: Quick Solution

Step 7: Enter the BlissHome app account and password, then tap “Link Now” to link your App account to enable the Skill.

Now you can control your projector using the Alexa app or your Echo device if the setup is successful.

BlissLights Sky Lite Evolve Galaxy Light Projector Not Connecting to Alexa

If you have issues connecting your BlissLights Sky Lite Evolve Galaxy Light Projector to Alexa, try the tips below to troubleshoot:

  • Ensure that your device is powered on and connected to the BlissHome App. Check and make sure that you can control your device through the app. If the projector is not online in the app, go over the setup steps to connect it then try reconnecting to Alexa.

 

  • Ensure you have a stable network connection during the setup. If the network is normal but the device network connection still fails, check whether the router is overloaded. You can disable a device’s Wi-Fi feature to reserve the channel for resource reallocation.

 

  • Make sure your device has been successfully connected or paired with the BlissHome App and the setup was successful. Also, ensure you entered the correct account details while linking the Alexa skills.

 

  • Check if the firmware is the latest version. Go to the Me section of the app and tap about to check for updates. If you can’t find an update, remove the device and add it again to the BlissHome app before connecting to Alexa.

If the problem persists, contact the BlissLights customer support team for further assistance.

BlissLights Sky Lite Evolve Galaxy Light Projector Not Connecting to Bluetooth

If you’re having issues connecting or pairing your BlissLights Sky Lite Evolve Galaxy Light Projector via Bluetooth, try the tips below to fix the problem:

  • Make sure that Bluetooth is turned on and your device is discoverable. If you have connected other Bluetooth devices to your phone, try disconnecting them first before attempting to connect the Blisslights Sky Lite Evolve.

 

  • Ensure that you are within 30 feet of your Blisslights Sky Lite Evolve Galaxy Light Projector due to the fact that Bluetooth have a limited range, so move closer to the projector if you are experiencing connection issues and this may fix the problem.

 

  • The app uses Bluetooth Mesh technology, which uses the location function to sense and connect to your light when it is in range. The app cannot connect without location enabled so ensure that you turned on location or GPRS settings.

 

  • Make sure Bluetooth is discoverable on your mobile device. Try forgetting the Blisslights Sky Lite Evolve Galaxy Light Projector from your device’s Bluetooth settings and reconnecting it as a new device.

If none of the above steps work, contact the BlissLights customer support for further assistance.

Blisslights Sky Lite Evolve Galaxy Light Projector Not Working

If your Blisslights Sky Lite Evolve Galaxy Light Projector is not working, there are several steps you can take to troubleshoot the issue:

  • Make sure that the projector is connected to a working power source and that the power cord is securely plugged in. Check the power outlet by plugging in a different device to see if it works.

 

  • Make sure that all cables and connections are secure and not loose. Ensure that the power cord and adapter are properly connected to the projector. Also, Inspect the cables and make sure they are not damaged or frayed. If they are, you may need to replace them.

 

  • Next, power off the Blisslights Sky Lite Evolve Galaxy Light Projector and unplug it from the power source. Wait for about 2 minutes or more and then plug it back in and turn it on again.

 

  • If power cycling the projector doesn’t work, try a factory reset by holding down the power button for 10-15 seconds until the indicator lights flash. This would remove all prior settings and fix any bugs within the Projectors firmware.

If the problem persists, contact the BlissLights customer support team for further assistance.

Blisslights Sky Lite Evolve Galaxy Light Projector Instructions

Here’s how to connect and use your Blisslights Sky Lite Evolve Galaxy Light Projector:

Related Post:  Leeleberd Led Strip Lights Full Troubleshooting Guide: Quick Fix

Step 1: Remove protective film sticker from laser aperture.

Step 2: Insert the USB power cord into a powered USB port or use the included wall adapter  to connect to an available electrical outlet. It is best practice for users to connect the power adapter to the wall before connecting the device to the power adapter.

Step 3: Place the Sky Lite Evolve in its included base on a flat solid surface and aim toward the desired ceiling/wall.

Step 4:. Press the power button located on the power cord. The nebula and laser stars will gradually illuminate and begin moving by default.

Step 5: Press the button again to cycle through default effects, and any custom effects created in the BlissHome app. To pair with the BlissHome app or a smart device, press and hold the button until it begins flashing.

Step 6: To turn off the light, cycle through the power effect modes until the unit turns off completely. Remove the power plug from the electrical outlet.

Blisslights Sky Lite Evolve Galaxy Light Projector Not Rotating

If your Blisslights Sky Lite Evolve Galaxy Light Projector is not rotating, try the troubleshooting tips below to fix the problem:

  • Make sure that the projector is connected to a working power source and that the power cord is securely plugged in. Check the power outlet by plugging in a different device to see if it works.

 

  • Power off the unit, then turn it back on to reset. You can also unplug the light for a few seconds and plug it back in. This should reset the project and hopefully it rotates when you turn it back on.

 

  • If the motor or rotation mechanism is dirty or obstructed, it can affect the rotation of the projector. Use a soft, dry cloth to clean any dirt or debris from the rotation mechanism while it is turned off then turn it back on and see if it works.

If none of the above steps work, contact the BlissLights customer support for further assistance. They may be able to help you diagnose and resolve the issue or offer a replacement if it’s an issue with the rotation mechanism or the projector itself.

Blisslights Sky Lite Evolve Galaxy Light Projector Buttons Not Working

If the buttons on your Blisslights Sky Lite Evolve Galaxy Light Projector are not working, here’s how you can try to troubleshoot the issue:

Step 1: Turn off the device and unplug it from power.

Step 2: Check for dirt and clean the buttons. Over time, dust can accumulate on the buttons and affect their responsiveness. To fix this, use a clean and dry cloth to gently clean the buttons then try to see if it works.

If the tip above doesn’t work, there are chances the buttons are damaged and you may need to replace them or reach out to the BlissLights support team for further directives on what to do.

Blisslights Sky Lite Evolve Galaxy Light Projector Not Blinking

If your Blisslights Sky Lite Evolve Galaxy Light Projector is not blinking, there are a few things you can try to troubleshoot the issue:

  • First, make sure that the Projector is plugged in to power and receiving adequate power. Check and ensure that the power cord is securely plugged into both the projector and the wall outlet.

 

  • Next, double-check to make sure that none of the buttons or switches on the projector have been accidentally pressed or moved. If not, restart the device to see if this helps fix the issue.

 

  • If the Projector is still not blinking, it could be an indication that the bulb is faulty or burned out. You can refer to the user manual for instructions on how to replace the bulb or contact BlissLights support for further instructions.

 

  • If your projector is still not working, try turning it off, unplugging it from the power source, and waiting a few minutes before plugging it back in and turning it on again. This may help reset the projector and resolve the issue.

If these tips do not help you get your Blisslights Sky Lite Evolve Galaxy Light Projector up and running again, contact the BlissLights customer support team for further assistance.

Final Words

The Blisslights Sky Lite Evolve Galaxy Light Projector is a great device to create a relaxing atmosphere in your home, but like any electronic device, you can run into issues while using it.

In this troubleshooting and set-up guide, we covered some common problems that you may encounter when setting up or using the projector, such as connectivity issues, non-rotation, unresponsive buttons, and more.

By following the setup steps and troubleshooting tips stated above, you should be able to resolve the issues with the Blisslights Sky Lite Evolve Galaxy Light Projector.