Berennis Smart Light Bulb Not Connecting: + Full Set up Guide - FixTechPoint.com: Smart Device Solution Arena

If you’re experiencing connectivity issues with your Berennis Smart Light Bulb, there’s no need to panic as the tips in this article will help you get your smart bulb back up and running in no time.

If you’re frustrated by your Berennis Smart Light Bulb’s failure to connect or set up, just keep calm and go over the step-by-step instructions to troubleshoot and set up the smart bulb in the paragraphs that’ll follow.

Without further delay, let’s jump in and fix those connectivity issues!

Table of Contents

How to Setup Berennis Smart Light Bulb With Magic Home Pro App

Do the following step-by-step instructions to connect your Berennis Smart Light Bulb with the Magic Home Pro App:

Step 1: Download the Magic Home Pro App from the Google playstore or the iOS app store or simply scan the QR code on the user manual to download the app.

Step 2: Open Magic Home App on your smart phone. Click the icon at the upper left corner of the app main screen, you’ll see “Sign in or Create account”. Register an account and log in with correct account details.

Step 3: Screw the bulb into a socket or lamp that has power and switch it on. Ensure it is blinking to show its readiness for pairing.

Step 4: Tap the “+” button in the upper right corner of the homepage, then select “connect device to Wi-Fi network”.

Step 5: Continue other in-app instructions and prompts to complete setting up your Berennis Smart Light Bulb with the Magic Home Pro App.

How to Fix Berennis Smart Light Bulb Not Connecting to Magic Home Pro App

If you are having trouble connecting your Berennis Smart Light Bulb to the Magic Home Pro App, here are some troubleshooting steps you can try:

Reboot your phone and power cycle the smart bulb. Sometimes rebooting your smartphone, smart bulb, or tablet can fix connectivity issues. Turn off your device and wait for a few seconds before turning it back on.

Make sure the smart bulb, smartphone, and router are as close to each other as possible to help boost the network connection signal during the setup process. Also, make sure the network function of your router and smartphone are unblocked, and that they can access the internet.

Uninstall and reinstall the Magic Home Pro App, as this can help fix any software glitches that might be preventing your smart bulb from connecting to the app. This also helps to automatically get the updated version of the app.

Make sure that location and Bluetooth are enabled on your device, as the Magic Home Pro App requires these settings to connect to your smart bulb faster without issues.

If none of these tips helps in fixing the connectivity issues, reach out to the Berennis customer support team for additional assistance.

How to Connect Berennis Smart Light Bulb to Wi-Fi

To setup your Berennis Smart Light Bulb to your home Wi-Fi network, do the following steps:

Step 1: Search for “Magic Home Pro” on the App Store or Google Play Store, or scan the QR code on the user manual to download it.

Step 3: Screw the bulb into a socket or lamp that has power and switch it on. Ensure it is blinking to show it’s readiness for pairing.

Step 4: Tap the “+” button in the upper right corner of the homepage, then select “connect device to Wi-Fi network”.

Step 5: Open the mobile phone Wi-Fi interface according to the App prompt, and then select the “LEDnetxxxxx” Wi-FI signal of the Berennis Smart Light Bulb. After successfully connecting, go back to the Magic Home Pro App.

Step 6: Select your home network from the list of available Wi-Fi networks and enter the correct Wi-Fi password. Rename your smart bulb and tap “Complete”.

Step 7: Enable remote function. This is optional but important because Alexa voice control, Google Home control, Siri shortcut voice control, and other functions may not work properly when it’s not enabled.

How to Fix Berennis Smart Bulb Not Connecting to Wi-Fi

If you are experiencing trouble connecting your Berennis Smart Bulb to your Wi-Fi network, here are a few troubleshooting tips you can try to fix the issue:

Power cycle the smart bulb. Sometimes a simple reboot can fix the Wi-Fi connectivity issues with your smart bulb. Try turning off the smart bulb and turning it back on after waiting for 2 minutes.

Reboot your router as the issue might be because of router’s network. Turn off your router and wait for 3 minutes before turning it back on. This should fix any network issues if the problem is from the router.

Check internet access and make sure your router has access to the internet. If the firewall of the router is enabled, try disabling it or test whether the communication port has been blocked and if other devices can connect to the network.

Check the MAC address binding of the router as some routers require binding the device’s MAC address to get internet access. Check if your router requires it and make sure the MAC address of your Berennis Smart Bulb is added.

Ensure that your Wi-Fi network is not a public network or a network that requires you to log in through a web page, such as the Wi-Fi network of an airport or hotel.

If the issue persists even after trying these troubleshooting methods, contact the customer support of Berennis Smart Bulb for further assistance.

How to Setup Berennis Smart Light Bulb With Alexa

To connect your Berennis Smart Light Bulb to Alexa, follow these setup steps:

Step 1: First, create a Magic Home cloud account and sign in. This is necessary to control your smart bulb with the Amazon Echo or remotely.

Step 2: Add your smart bulb to the Magic Home Pro App and enable the bulb for remote control. On the “Home” page, press and hold your bulb to rename it and then proceed to the next step.

Step 3: Download the Amazon Alexa app and sign in with your Amazon account details.

Step 4: In the skills section of the Alexa app, search for the “Magic Home” skill. Once you find it, select it and you’ll be redirected to the login page of the Magic Home Pro App.

Step 5: Sign in using your Magic Home cloud account to link your Magic Home Pro account to the Alexa app and enable the Magic Home skill.

Step 6: The next step is to discover your smart lights from the Alexa app. You can do this by saying, “Alexa, discover devices”.

Once Alexa has completed discovering your smart bulb, it will appear in the Smart Home section of the Alexa app and you’ll be able to control it with your voice.

How to Fix Berennis Smart Light Bulb Not Connecting to Alexa

To fix Berennis Smart Light Bulb not connecting to Alexa, follow these troubleshooting steps:

Check if the Berennis Smart Light Bulb is properly installed and connected to the Magic Home Pro app. If not, reinstall the bulb and connect it to the app. Also, ensure it’s enabled for remote control. If not, follow the in-app instructions to connect your smart bulb to the app.

Make sure that the Magic Home Pro app is connected to your Amazon account. Open the app, go to the settings, and link your Amazon account to the app. Remember, using the wrong account details will cause issues, so enter the correct account details.

Check if your Wi-Fi network is working properly. If not, reboot your Wi-Fi router, wait for a few seconds, and try to connect the smart bulb to Alexa again.

Ensure that your smart bulb and Echo device are within range of the Wi-Fi network. If not, move them closer to the router and try to connect again. This will help to improve the network and help the connection process to be faster.

If none of these troubleshooting steps works, try resetting your smart bulb and Echo device and start the setup process again. If the problem persists, contact Berennis customer support for further assistance.

How to Connect Berennis Smart Light Bulb to Google Assistant

To connect your Berennis Smart Light Bulb to Google Assistant, follow these setup steps:

Step 1: Download the Magic Home Pro App, create a Magic Home cloud account, and sign in. This is necessary to control your smart bulb with Google Assistant.

Step 2: Add your smart bulb to the Magic Home Pro App and enable the bulb for remote control. On the “Home” page, press and hold your bulb to rename it and then proceed to the next step.

Step 3: Download the Google Home app from your mobile device’s app store and sign in with your Google account details.

Step 4: Tap the red box in the upper left corner of the Google Home app, select “Assistant settings,” and then select “Home Control.”

Step 5: Search and select “Magic Home.” Select “Magic Home” from the list and you’ll be redirected to the Magic Home Pro App.

Step 6: Enter your Magic Home Pro account and password to finish the account linking. Your device should now be listed in the Home Control device list.

At this point, you’re all set up. You can now control your smart bulb by giving it voice commands.

How to Fix Berennis Smart Light Bulb Not Connecting to Google Assistant

If you’re having trouble connecting your Berennis Smart Light Bulb to Google Assistant, try the following troubleshooting steps:

Ensure that your smart bulb is connected to the Magic Home Pro App and enabled for remote control. If it is not, follow the in-app instructions to connect your smart bulb to the app.

Check that your Google Home device is properly connected to the internet and is within range of your Wi-Fi network. Maintain a stable and good network connection during the entire setup process.

Restart your smart bulb, Wi-Fi router, and Google Home device. Allow them to cool off for some time then turn them back on and go back to the setup process again.

If none of these steps work, try resetting your smart bulb to its factory default settings and start the setup process again.

How to Setup Berennis Smart Light Bulb With Siri Shortcut

To add your Berennis Smart Light Bulb to Siri Shortcuts, follow these steps:

Step 1: Open the Magic Home app, click the “+” in the upper right corner of the main interface to “Create Scene”, and “naming the scene”.

Step 2: Enter the scene setting interface to “add devices”. Select your smart bulb from the list or search for it using the search option and select it once you’ve found it.

Step 3: After adding the smart bulb successfully, tap on the smart bulb to set the effect you want, and click “Add to Siri”.

Step 4: Add a custom phrase Siri will use to tell or prompt the Magic Home Pro App to run the Shortcut. Usually it should look like “When I say” then “Do”.

Step 5: Tap “Add to Siri” to finish adding your Berennis Smart Light Bulb to Siri Shortcuts

If the setup is successful in the Magic Home app. You can say to Siri: “Turn on Living room light” to see if Siri will execute the command.

How to Fix Berennis Smart Light Bulb Not Connecting to Siri Shortcut

If you are having trouble connecting your Berennis Smart Light Bulb to Siri Shortcut, here are tips you can try to troubleshoot the issue:

To be able to add your Berennis Smart Light Bulb to Siri Shortcuts, ensure that you’re using iOS version 12.0 and above. If you use anything below 12.0, your smart bulb won’t be able to connect to Siri Shortcuts. Upgrade your iOS version and try again.

During the setup process, ensure that your smart bulb is online in the Magic Home Pro App. Also, remote access should be enabled, otherwise the smart device cannot be controlled via Siri.

Make sure you’ve successfully connected your smart bulb to the Magic Home app and it has internet access. Furthermore, remove the bulb from the Magic Home Pro App and re-add it again then try connecting to Siri.

If the troubleshooting tips above didn’t help to fix the problem, contact the Berennis customer support team for further assistance.

How to Factory Reset Berennis Smart Light Bulb

To restore your Berennis Smart Light Bulb to its factory default settings, do the following steps:

Step 1: Power off the bulb.

Step 2: Power on and off the bulb four times（on-off-on-off-on-off-on-off-on) while waiting for 2 seconds between each turn on and off position.

If the reset is successful, the smart bulb will flash or blink for a few seconds.

Final words

If you’re experiencing connectivity issues with your Berennis Smart Light Bulb, there’s no need to panic as the troubleshooting tips outlined in this article should help you fix the smart bulb.

Remember to double-check your Wi-Fi connection to make sure it’s working properly, and make sure your device’s firmware is up to date. Reset the bulb if everything else fails to see if this fixes the problem.

As a last resort, consider replacing the smart bulb as it may be damaged or reach out to the Berennis customer support team for further assistance.