Aisirer Smart Bulb Won’t Connect to Wi-Fi? (Solved)!
If you are having issues getting your Aisirer Smart Bulb connected to Wi-Fi, then you’re on the right page. In this post, we covered how to troubleshoot your Aisirer Smart Bulb Won’t Connect to Wi-Fi. If this really sounds like what you’re looking for, keep reading!
Aisirer Smart Bulb Won’t Connect
So, try these troubleshooting tips if you are having a hard time getting your Aisirer Smart Bulb Won’t Connect to Wi-Fi:
1. Ensure the Bulb is in Pairing Mode
The Smart Bulb must be ready to pair before it can successfully connect to Wi-Fi. So, before the Wi-Fi connection setup, ensure the bulb is ready to pair.
If the bulb is ready to pair, it will be flashing. However, if the light is not flashing to show that it is ready to pair or connect, your device won’t connect to Wi-Fi.
To get your smart bulb ready to connect to Wi-Fi, switch the Smart Bulb on and off 3 times, and when the light starts flashing, try to connect to Wi-Fi.
Do this to get the bulb into pairing mode:
- Screw the bulb into a lamp or socket and ensure the switch works properly.
- Turn the bulb on and off three times in a row
- Wait for the bulb to flash, which means they are in pairing mode.
Now, try to connect to Wi-Fi and see if these fix the problem else, continue the next troubleshooting tip.
2. Ensure You Have the Right App
Ensure that you are using the correct mobile app when connecting to Wi-Fi, download the app on your phone, open the app and connect the smart bulb.
The correct app to use is the Smart Life app, which is available on your Android or IOS app store. During the setup, make sure the Bluetooth is on to ensure that your Smart bulb finds the Wi-Fi network seamlessly.
After Installation of the app, open the app and follow the instructions to add your Smart Bulb.
When you have successfully connected to the app, try reconnecting to Wi-Fi. If you are still having issues, try the next troubleshooting step.
3. Ensure You Have a Good Network Connection
Test the strength of your home Wi-Fi network with other devices such as your mobile or smartphone to make sure it has a strong network coverage and works properly.
During the initial setup, make sure that your smart bulb and router are very close and there is no object obstructing them. Also, ensure that your mobile device is close by too as this helps the bulb connect to Wi-Fi faster without interference.
If the connection works properly but your device can’t find the network, you may need to upgrade your router or add an extender to increase its range and connectivity.
If you have a good network connection, continue the next troubleshooting tip.
4. Check Your Network Bandwidth
Be sure that you are using a 2.4 GHz Wi-Fi network when connecting the smart bulb to Wi-Fi. Also, ensure that your home network is on a detectable status.
Many routers have 5 GHz and 2.4 GHz networks and most times your phone and smart device will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network.
Go to your router’s setting to disable the 5 GHz network bandwidth or ensure that you separate the two network bandwidths so you’ll know which network band you’re connecting to during setup.
Always Keep the bulb connected with your home’s 2.4 GHz Wi-Fi network during Wi-Fi setup.
5. Reset the Smart Bulb
If everything else fails, then you need to reset your device and see if this may fix the problem.
Usually, this removes all bugs, settings, and other problems you might not have noticed. To reset your Aisirer smart bulb;
Turn the bulb off and wait for a few seconds now, turn the bulb on and off three times in a row, and wait for the bulb to blink.
If it blinks, the reset may have been a success. So, try reconnecting back to Wi-Fi and see if these fix the problem.
Aisirer Smart Bulb is Flickering
If your Aisirer smart bulb is flickering, it could be due to one of the following reasons:
- Incompatibility: Check if your lamp or fixture has a standard B22 bayonet base and can support a 9W LED bulb. If not, it could cause the bulb to flicker.
- Loose connection: Ensure that the bulb is screwed in properly and securely inserted into the socket. A loose connection could cause flickering.
- Electromagnetic interference: Move your bulb away from any devices that may cause electromagnetic interference, such as microwaves, routers, or cordless phones. This could help reduce flickering.
- Fluctuating electrical current: A fluctuating current can cause flickering. Check if the current coming to the bulb is stable or not.
Aisirer Smart Bulb is Not Responding
If you are facing any issues with your Aisirer smart bulb not responding to your commands, it could be due to the following reasons:
- The bulb may not be connected to the Wi-Fi network. Make sure that both your bulb and smartphone are connected to the same 2.4GHz Wi-Fi network with a strong and stable signal.
- The bulb might not be paired with the app or voice assistant. Firstly, ensure that you have downloaded the Smart Life app and registered an account. Once done, follow the instructions on the app to add your bulb and pair it with your voice assistant (such as Alexa or Google Assistant).
- The app or voice assistant may not be working correctly. Restart the app or voice assistant and check for any updates. Also, ensure that you have granted the necessary permissions and enabled the relevant skills for your voice assistant.
- The bulb might be offline or out of range. Check that your bulb is powered on and within the Wi-Fi range. If your bulb shows offline on the app, try resetting it by turning it on and off three times quickly until it flashes rapidly.
Aisirer Smart Bulb is Not Working
If your Aisirer smart bulb is not working at all, it may be because of one of the following reasons:
- The bulb is burned out or broken. Check that your bulb is not damaged or cracked. If your bulb does not light up even after changing the lamp or fixture, you may need to replace it with a new one.
- The power supply is unstable. Check that there is no power outage or voltage fluctuation in your area. If possible, use a surge protector or a voltage stabilizer to protect your bulb from power surges or spikes.
- The switch or dimmer is incompatible or faulty. Check that you are using a standard on/off switch or a compatible dimmer for your bulb. Do not use a traditional dimmer or a 3-way switch, as they may cause flickering or damage to your bulb.
Frequently Asked Questions
How Do I Put Aisirer Smart Bulb in Pairing Mode?
To put your Aisirer smart bulb in pairing mode, follow these steps:
- Make sure that your smartphone and your bulb are connected to the same 2.4GHz Wi-Fi network.
- Open the Smart Life app and tap on the “+” icon in the top right corner.
- Select “Lighting Devices” from the list of device types.
- Turn on and off the switch of your lamp three times quickly until the bulb flashes rapidly.
- Confirm that the indicator light is blinking rapidly and tap “Next.”
- Enter your Wi-Fi password and tap “Confirm.”
- Wait for the app to connect to your bulb, and name it as you wish.
Why Is My Smart Light Not Connecting to My Phone?
If you’re having trouble connecting your smart light to your phone, there could be a few reasons why. Here are some things to check:
- Make sure your phone and your bulb are connected to the same 2.4GHz Wi-Fi network. Also, ensure that the network signal is strong and stable.
- Check the distance between your phone or bulb and the router. If they’re too far away, try moving them closer or using a Wi-Fi extender.
- Verify that your router is compatible with your bulb. Your router should support 802.11b/g/n protocols and have a WPA/WPA2 encryption mode.
- If your router is overloaded or has too many devices connected to it, try reducing the number of devices connected to your router. Alternatively, use a different channel or frequency band for your bulb.
Do These Lights Overheat if They Are Left on for Too Long?
No, these lights do not overheat if they are left on for too long. These lights are made of high-quality materials and have a low power consumption of 9 watts. They also have a long lifespan of up to 30,000 hours and good heat dissipation performance. However, it is recommended that you turn off the lights when you are not using them to save energy and extend their life.
Can These Be Controlled Through the Alexa Feature on a “Blast” Speaker or Is an Echo Specifically Needed?
Yes, these can be controlled through the Alexa feature on a “Blast” speaker or any other device that has Alexa built-in. You do not need an echo specifically to control these lights. However, you need to enable the Smart Life skill on your Alexa app and link it with your Smart Life account. Then, you can use voice commands to control your lights, such as “Alexa, turn on the living room light” or “Alexa, set the bedroom light to blue”.
Why Is My Smart Light Bulb Not Working?
If your smart light bulb is not working, it may be because of one of the following reasons:
- The bulb is burned out or broken. Check that your bulb is not damaged or cracked. If your bulb does not light up even after changing the lamp or fixture, you may need to replace it with a new one.
- The power supply is interrupted or unstable. Check that there is no power outage or voltage fluctuation in your area. If possible, use a surge protector or a voltage stabilizer to protect your bulb from power surges or spikes.
- The switch or dimmer is incompatible or faulty. Check that you are using a standard on/off switch or a compatible dimmer for your bulb. Do not use a traditional dimmer or a 3-way switch, as they may cause flickering or damage to your bulb.
Final Words
There you have it, we hope one of the troubleshooting tips above helps you in fixing the problem. Try out all the guidelines above to see which one works for you.
If everything else fails, contact Aisirer Customer support for help or consider replacing your device.