Lumiman Smart Light Bulb Not Connecting: Quick Fix

Is your Lumiman Smart Light Bulb not connecting and you’re looking for how to fix the connectivity issue with your smart bulb, you’re in luck, as this article has got you covered.

In this post, you’ll find setup steps and troubleshooting tips to help you fix the issue with your smart bulb. Read on to find out how to get your smart bulb fixed in no time.

Lumiman smart light bulb not connecting to PlusMinus App, Wifi, Siri, Alexa, Google Home Assistant

Without further ado, let’s begin!

How to Setup Lumiman Smart Light Bulb With PlusMinus App

To connect your Lumiman Smart Light bulb with the PlusMinus app, do the following steps;

Step 1: Scan the QR code on the user manual to download the PlusMinus app or go to your mobile device app store to download the app. Download PlusMinus app for iOS | Download PlusMinus app for Android

Step 2: Signup for a new account and log in or simply sign in with your correct account details if you have an account.

Step 3: On the homepage, tap the “+” icon at the top right corner of the page and select “Add Device”

Step 4: Tap “Lighting” then search for your smart bulb

Step 5: Select your smart bulb when found from the list and continue other prompts and instructions to complete the connection process.

How to Fix Lumiman Smart Light Bulb Not Connecting With PlusMinus App

If you cannot connect your Lumiman Smart light bulb to the PlusMinus app, try the following tips to troubleshoot;

  • Ensure that your smart bulb is screwed into a working lamp or socket and works properly. Also, ensure that the bulb is in pairing mode – the bulb will blink rapidly for EZ mode and blink slowly for AP mode. If not, reset the bulb and try again.
  • If the connection and setup through the EZ mode fails repeatedly, switch to the AP mode after resetting the bulb, then go over the setup steps again to see if this fixes the problem.
  • Allow the app to use your location data. To do this, go into phone settings. Go to “settings” 2. Select “PlusMinus” 3. Open “Location” and select “While using App”.

How to Connect Lumiman Smart Light Bulb to Wi-Fi

Step 1: Switch the light bulb on and off 3 times. Afterward, the bulb should start blinking rapidly 2 times per second

Step 2: While the bulb is blinking rapidly, switch it on and off 3 times again. Afterward, the bulb should start blinking slowly once every 2 seconds.

Step 3: Go to your mobile device’s Wi-Fi settings and search for the smart bulbs hotspot

Step 4: Select “SmartLife-XXXX” from the list to connect to the smart bulbs hotspot

Step 5: Enter your Wi-Fi password and tap “Connect Now”

Related Post:  Meross Smart Light Bulb Not Connecting: Quick Fix

Now go to the PlusMinus app, to configure and set up your smart light bulb.

How to Fix Lumiman Smart Light Bulb Not Connecting to Wi-Fi

If you have trouble connecting your Lumiman Smart Light Bulb to your Wi-Fi network, try the following tips to troubleshoot;

  • Keep the Wi-Fi router, your smartphone, and the smart bulb close to each during the connection process.
  • Allow the app to use your location data. To do this, go into phone settings. Go to “settings” 2. Select “PlusMinus” 3. Open “Location” and select “While using App”
  • Make sure you’re not trying to connect to your router’s 5Ghz band. The Lumiman smart bulb would only connect to a 2.4GHz Wi-Fi network.
  • Make sure you’re connecting to the right Wi-Fi network and that the Wi-Fi password you entered is correct. Because passwords are case-sensitive, double check the password contains no typos, extra spaces, or characters.
  • Make sure that the internet connection and Wi-Fi network in your home are working perfectly. Also, turn off Firewall and VPN services if they are active, as they may interfere with the connection process.

If you still have trouble after following these steps, please the Lumiman customer service for further assistance.

How to Connect Lumiman Smart Light Bulb to Siri

To set up your Lumiman Smart Light Bulb to Siri, follow the simple steps below;

Step 1: Download the PlusMinus app from the Google Play or the Apple app store and log in with your Amazon account. Create an account if you do not have an account.

Step 2: Add your smart bulb to the “PlusMinus” App. Refer to the setup steps in the PlusMinus app above to complete the setup.

Step 3: Open the PlusMinus app and then click the “Smart integrations” button in the right upper corner.

Step 4: Choose link to “Hey Siri”

Step 5: Continue the in-app instructions and prompt to finish the setup with Siri.

How to Fix Lumiman Smart Light Bulb Not Connecting to Siri

If you have trouble connecting your Lumiman Smart Light Bulb to Siri, try the tips below to troubleshoot;

  • Check and ensure that your smart bulb is properly fitted into the lamp or socket. A smart bulb that is turned off will not connect to Siri. Turn off the bulb, then wait for about 30 to 60 seconds, turn it back on and try settingit up again.
  • Ensure that your smart bulb is properly configured and connected to the PlusMinus app. This is because all devices associated with your PlusMinus account will be synced by Siri.
  • Siri can only be used on Apple iOS devices. If you’re using an Android device, try setting up with Alexa and Google Assistant as Siri won’t work on Android devices.

If you’re still unable to connect to Siri, contact the Lumiman customer support team for further help.

How to Connect Lumiman Smart Light Bulb to Alexa

Setting up your Lumiman Smart Light Bulb with Alexa allows you to control your smart bulb through the Amazon Echo devices. Here’s how to connect to Alexa;

Step 1: Download the Amazon Alexa app from the Google Play Store or the Apple app store and log in with your Amazon account. Create an account if you do not have an account.

Step 2: Add your smart bulb to the “PlusMinus” App. Refer to the setup steps in the PlusMinus app above to complete the setup.

Step 3: Open the PlusMinus app and then click the “Smart integrations” button in the right upper corner.

Step 4: Choose the link to “Amazon Alexa” then tap “Sign in with Amazon”

Step 5: Enter your Lumiman account email and password to link the Lumiman app with the Alexa app.

Alexa will sync all devices connected to the Lumiman app and if the setup is successful, find your smart bulb in the devices list in the Alexa app.

Related Post:  Energizer Smart Light Bulb Not Connecting: + Full Set up Guide

How to Fix Lumiman Smart Light Bulb Not Connecting to Alexa

Try the following troubleshooting advice to see if it helps to fix your Lumiman Smart Light Bulb not connecting to Alexa:

  • Make sure your smart bulb is correctly configured in the PlusMinus app. Setup errors will occur while attempting to connect to Alexa if it is not connected to the PlusMinus app.
  • Check to see if the most recent software and firmware versions for the Alexa app and your Echo device are installed. Check your app store for updates, or ask Alexa if your firmware is up to date, as an outdated version may cause connectivity issues.
  • While connecting your PlusMinus to Alexa, double-check the password section. Make sure you’ve used the right password. Go over the setup procedure again if you’re unsure.

Did none of the tips above work? Contact the Lumiman support team for further help.

How to Connect Lumiman Smart Light Bulb to Google Home Assistant

Here’s how to set up your Lumiman light bulb to Google Assistant;

Step 1: Download the Google Home app from the Google Play Store and sign in with your Google account.

Step 2: Add your smart bulb to the “PlusMinus” App. Refer to the setup steps in the PlusMinus app above to complete the setup.

Step 3: Open the PlusMinus app and then click the “Smart integrations” button in the right upper corner.

Step 4: Choose link to “Google Assistant” then tap “Sign in”

Step 5: Enter your Lumiman account email and password to link the Lumiman app with the Google Home app

How to Fix Lumiman Smart Light Bulb Not Connecting to Google Home Assistant

If you have issues setting up your Lumiman Smart Light Bulb to Google Assistant, try the following tips to troubleshoot;

  • Restart your mobile device, speaker, and smart bulb after turning them all off for at least 10 seconds or more. Once everything is back up, repeat the setup procedures.
  • On your mobile device, enable location services, in order to ensure a successful and quick connection. Make sure the location services or GPRS settings are enabled on your mobile device.
  • Check if the Google Home app needs an update on the Google playstore. If you find an update, download and install, then try the setup process again.

How to Factory Reset Lumiman Lighting Smart Light Bulb

To perform a factory reset on your LUMIMAN smart bulb, follow the steps below:

Step 1: Open the app on your phone and select the bulb you want to reset.

Step 2: Tap the three dots in the top right-hand corner of the PlusMinus. Next, scroll down to the bottom of the page and tap “Restore manufacturer mode”.

To manually reset, turn the bulb on and off from the switch three times and the bulb should start blinking rapidly, showing the reset is successful.

Lumiman Smart Light Bulb Not Blinking

Try the tips below to troubleshoot your Lumiman Smart Light bulb not blinking;

  • Check the switch to ensure it works properly as this may be a power issue. Also, check the lamp or socket go confirm they are working. If you’re not sure, move your smart bulb to a different lamp or socket to see if it comes on.
  • The next thing to do is to reset your smart bulb, Turn it on-off-on-off-on and wait for 5 seconds. The light bulb will start blinking..
  • If your smart bulb doesn’t blink after trying the tips above, contact the Lumiman support team for further help.

Lumiman Smart Light Bulb Not Turning on

Is your Lumiman Smart Light Bulb not turning on? Try the following tips to fix the issue;

  • Check the Smart bulb for any physical damage. The bulb may be damaged from contact with excess electricity or because of duration of use.
  • Reset the smart bulb by turning it off from the switch, on and off for five times and the bulb should start blinking.
Related Post:  Aisirer Smart Bulb Won’t Connect to Wi-Fi? (Solved)!

If the smart bulb is still not turning on, consider replacing your smart bulb as it may be damaged or contact Lumiman customer support for help.

How to Manually Reset Lumiman Smart Bulb

To manually reset your Lumiman smart bulb, follow these steps:

  1. Turn off the power to the light fixture where the Lumiman smart bulb is installed.
  2. Wait for two seconds, and then turn on the power.
  3. Repeat this process of turning off and on the power four times until the Lumiman smart bulb starts blinking rapidly.
  4. Your Lumiman smart bulb is now reset and ready to be paired with the app or voice assistant again.

Lumiman Light Bulb Not Working

If your Lumiman light bulb is not working at all, there are some possible reasons and troubleshooting steps that you can try:

  • Check if the power supply to the light fixture is on and stable. If not, switch on the power or fix any electrical issues.
  • Check if the Lumiman light bulb is screwed in correctly and securely. If not, tighten it or replace it with a new one.
  • Check if the Lumiman light bulb is damaged or defective. If yes, contact Lumiman customer service for a replacement or refund.

Lumiman Smart Bulb App

The Lumiman smart bulb uses the Plus Minus app, which is a free application that you can download from Google Play or App Store to control your Lumiman smart bulbs using your smartphone. With the Lumiman smart bulb app, you can:

  • Turn on/off your Lumiman smart bulbs individually or in groups.
  • Adjust the brightness, color temperature, and color of your Lumiman smart bulbs.
  • Create scenes and schedules for your Lumiman smart bulbs according to your preference or occasion.
  • Share your Lumiman smart bulbs with other users and manage their access.
  • Connect your Lumiman smart bulbs to Amazon Alexa or Google Assistant for voice control.

Plus Minus App Not Working

If your Plus Minus app is not working as expected, try the tips below:

  • Your smartphone is not connected to the same Wi-Fi network as your Lumiman smart bulbs. Make sure that both devices are on the same network and try again.
  • Your smartphone’s Bluetooth is turned off or not paired with your Lumiman smart bulbs. Turn on your Bluetooth and pair it with your Lumiman smart bulbs through the app settings.
  • Your smartphone’s screen sensitivity is too low or too high. Adjust your screen sensitivity through your phone settings.

How to Put Lumiman Smart Bulb in Pairing Mode

To put your Lumiman smart bulb in pairing mode, you need to manually reset it first by following the steps mentioned above. 

After resetting your Lumiman smart bulb, it will automatically enter pairing mode and start blinking rapidly. You can then add it to the app or voice assistant by following their respective instructions.

Conclusion

The issue with your Lumiman smart bulb can easily be fixed by power cycling the bulb and then try trying setup process again. Check out Smart Light Bulb Not Connecting for troubleshooting tips if you use other brands of Smart Bulbs.

Also, always carry out the setup process connected to a 2.4GHz Wi-Fi network and as a last resort reset or replace your smart bulb. Click here to buy the original from Amazon.

Frequently Asked Questions

What App Does Lumiman Use?

Lumiman uses the “Plus Minus App” that you can download from Google Play or App Store for free. You can also use other compatible apps such as “Smart Life” or “Tuya Smart” to control your Lumiman smart bulbs.

Does Lumiman Work With Google Home?

Yes, Lumiman works with Google Home and other Google Assistant devices. You can connect your Lumiman smart bulbs to Google Home through the Lumiman app settings and then use voice commands to control them.

Why Is My Light Turned Off After a Power Outage?

If your light is turned off after a power outage, it means that your Lumiman smart bulb has lost its connection to the app or voice assistant. You need to reconnect it by turning on the power and waiting for the Lumiman smart bulb to blink slowly. Then, open the app or voice assistant and follow the instructions to reconnect your Lumiman smart bulb.

Why Is My Light Bulb Not Blinking?

If your light bulb is not blinking when you try to reset it or pair it, there are some possible reasons and solutions that you can try:

  • Your light bulb is already paired with the app or voice assistant. Check if your light bulb is showing up on the app or voice assistant and try to control it. If it works, you do not need to reset it or pair it again.
  • Your light bulb is in a low-power state. Turn off the power to the light fixture and wait for 10 seconds. Then, turn on the power and try to reset it or pair it again.

Are These Lights Compatible With Homekit?

Yes, these lights are compatible with Homekit. They also work with Amazon Alexa and Google Assistant for voice control.