Feit Electric LED Bulb Troubleshooting Guide

Just what the title says ‘Feit Electric LED Bulb Troubleshooting Guide’, this article contains tips to help you troubleshoot some issues you might have with your Feit Light Bulb.

Feit Electric LED Bulb Troubleshooting Guide

So, in the following paragraphs, we covered some common problems you may face while using the Feit Electric LED Bulb and how to fix them. Let’s head right into it.

Feit Electric LED Bulb Troubleshooting Guide:

So here are some problems you may face while using the Feit Electric LED bulb and how to troubleshoot:

Feit Smart Light Bulb Not Connecting to Wi-Fi

If you are having trouble connecting your Feit Electric Smart Bulb to Wi-Fi, here are some troubleshooting tips that might help:

  1. Check and ensure that you are connecting to a 2.4 GHz network bandwidth and not the 5 GHz band. Also, if your device is closer to your router (5-15 feet) it may automatically connect to the 5GHz band therefore, move it a little further apart.
  2. Ensure that you are not using a VPN or proxy server in the background when trying to connect your smart bulb to Wi-Fi.
  3. Test your Wi-Fi network and ensure that it works properly. Ensure that you have good and strong network coverage else, you may have difficulties connecting to Wi-Fi. You may add a Wi-Fi extender to improve the network.
  4. Make sure that you enter the correct Wi-Fi credentials during setup. Passwords are case-sensitive so, ensure to enter the correct password.
  5. Ensure that your device is ready to pair before trying to connect to Wi-Fi. The light will be blinking if it is ready to pair. Turn the light on and off three consecutive times in a row to get it into pairing mode.

Feit Smart Light Bulb Lights Do Not Turn On

A power outage or router service interruption will disconnect the smart bulb from the network and make it turn itself off.

Also, there may be a blown fuse or circuit breaker cutting off power to your smart bulb. Therefore, check and ensure that your smart bulb has power, as it may not have power.

Make sure that the breaker or wall switch is not faulty, works properly, and is in the ON position. If the Smart Bulb does not turn on, you will have other issues, including lights not working, not responding and failure to connect to Wi-Fi.

Your Bulb might have burned out, if this is the case, replace your smart bulb.

Feit Smart Light Bulb Lights Flickering: How to Troubleshoot

Irregular power flow and supply may cause this. Tighten any loose bulbs and ensure that the bulb is rate dimmable. Also, ensure that the wires connecting the bulbs are safely secured and sealed.

Related Post:  Calex Smart Bulb not Connecting to Wi-Fi? (How to Fix)

Flickering occurs at lower dim levels, so log into the Feit Electric App to adjust the dim level, which may help with the flickering.

Open the Feit electric app to see if smart features are enabled. If so, find the settings button and then adjust the dimming level or minimum brightness until the flickering stops.

You can also set the low-dim point manually on your dimmer, check your user manual for instructions.

Can’t Set Color Changing? Here is How:

To change the color of the smart bulb, open the Feit Electric app, find the bulb icon and tap and hold it to open the individual bulb settings and features.

Use the round slider of the turnable white feature to adjust color temperatures from Warm (2700K) to Cool (6500K).

Now, tap on any part of the color picker to select the desired color or choose a preset color. You can find other preset colors at the bottom of the menu, select any that suits your preference and watch your bulb change color.

You can use the slide bar to adjust the color saturation to your taste.

How to Factory Reset Feit Smart Light Bulb

Resetting your Feit Light Bulb can help resolve several issues you might be having with it. So if you’ve tried some of the troubleshooting steps above and your light bulb is still not working, try resetting it to remove unseen bugs or incorrect settings.

To reset your Feit Electric LED Bulb, turn it on for a second and turn it off for another second, three consecutive times.

When the bulb flashes, this may mean that the reset was a success and that the smart device is ready to pair or for setup.

Feit Electric LED Bulb Not Turning On

To fix this problem, you can try the following steps:

  • Check if the bulb is securely screwed into the socket and if the socket is in good condition. If not, replace the bulb or the socket as needed.
  • Check if the bulb is compatible with the fixture or the dimmer switch. Feit Electric LED bulbs are designed to work with most standard fixtures and dimmers, but some exceptions may apply. You can refer to the product manual for more information on compatibility.

Feit Electric LED Bulb Flickering

Feit Electric LED bulb users may encounter an issue where the bulb flickers or flashes intermittently. To fix this, try these steps: 

  1. Check if the power source is stable and adequate for the bulb. You can use a multimeter or voltage tester to check the voltage level at the socket. If it’s too high or low, adjust your wiring or use a voltage regulator. 
  2. Confirm if the bulb is compatible with the fixture or dimmer switch. Although Feit Electric LED bulbs work with most standard fixtures and dimmers, some exceptions may exist. 
  3. Check if the bulb is overheating or has loose connections. Gently touch the bulb to feel its temperature. If it’s too hot, reduce its usage time or use it in a cooler environment. Also, ensure that the bulb is securely screwed into the socket and that there are no loose wires or connections.

Feit Electric LED Bulb Dimming

If your Feit Electric LED bulb dims or loses brightness over time, you can try the following steps: Check if it’s under warranty, avoid exposing it to external factors, and calibrate it with the dimmer switch by turning off both switches, setting them to maximum brightness, waiting 10 seconds, turning them off again, setting them to minimum brightness, waiting 10 seconds, and then adjusting them to your desired brightness level.

Related Post:  Gosund Smart Light Bulb Not Connecting: + Full Set up Guide

Feit Electric LED Bulb Making Noise

To fix this problem, you can try the following steps:

  • Check if the power source is stable and suitable for the bulb. You can use a voltage tester or a multimeter to measure the voltage level at the socket. If it is too low or too high, you may need to adjust your wiring or use a voltage regulator.
  • Check if the bulb is compatible with the fixture or the dimmer switch. Feit Electric LED bulbs are designed to work with most standard fixtures and dimmers, but some exceptions may apply. 
  • Check if the bulb has a faulty driver or a loose component. You can listen to the bulb carefully to identify the source of the noise. If it is coming from the base of the bulb, it may indicate a problem with the driver. 

Feit Electric LED Bulb Overheating

If you are using Feit Electric LED bulbs, you might come across a common problem of overheating or being hotter to touch. There could be several reasons for this, such as using an enclosed or poorly ventilated fixture that traps heat, using it in a high-temperature or high-humidity environment, or the bulb being defective or having a short circuit that causes excessive heat. 

To fix this issue, you can follow these steps: 

  1. Confirm if the bulb is being used in an appropriate fixture that allows sufficient air circulation and heat dissipation. You can refer to the product manual or the Feit Electric website for more information on suitable fixtures for Feit Electric LED bulbs. 
  2. Check if the bulb is being used in an environment that does not exceed its optimal temperature and humidity range. 

Feit Electric LED Bulb Burning Out Quickly

Feit electric LED bulbs are known for their energy efficiency and long lifespan. However, some users may need help with the bulb burning out too quickly or not lasting as long as expected. This issue can be caused by several factors, such as the bulb being used beyond its rated lifespan, frequent power surges or fluctuations that damage its components, or poor quality control affecting its durability. 

To fix this issue, the following steps can be taken: 

  1. Check if the bulb is being used within its rated lifespan and usage time. Feit Electric LED bulbs are designed to last up to 22 years based on 3 hours of daily use, with an average lifespan of 25,000 hours. However, the actual lifespan may vary depending on usage patterns. 
  2. Ensure that the bulb is protected from power surges or fluctuations that may shorten its lifespan. Using a surge protector or a voltage regulator can help prevent any damage to your bulbs from unstable or insufficient voltage. 
  3. Check if the bulb is still under warranty and if it is defective or has poor quality control that affects its durability. If so, contacting Feit Electric customer service can help you get a replacement or a refund. 

Frequently Asked Questions

Why Is My Feit Electric Bulb Offline?

Your Feit Electric bulb may be offline if it is not connected to your Wi-Fi network or if there is a problem with your router or internet service provider. To fix this, you can try the following steps:

  1. Check if your Wi-Fi network is working properly and if your router is within range of your bulb.
  2. Check if your bulb is powered on and if it has a solid blue indicator light. If not, you may need to reset your bulb by turning it off and on three times quickly.
  3. Check if your bulb is paired with the Feit Electric app or the voice assistant of your choice. If not, follow the instructions on the product manual or the [Feit Electric website] to set up your bulb.
Related Post:  Govee Light Bulb Not Connecting to Wi-Fi? (How to Troubleshoot)

Why Is Feit Electric Not Connecting?

Feit Electric may not be connecting if there is a problem with the Feit Electric app or the voice assistant that you are using to control your bulb. To fix this, you can try the following steps:

  1. Check if the Feit Electric app or the voice assistant is updated to the latest version and if it has access to your Wi-Fi network and location services.
  2. Check if the Feit Electric app or the voice assistant recognizes your bulb and if it has the correct name and settings. If not, delete your bulb from the app or the voice assistant and add it again.
  3. Check if the Feit Electric app or the voice assistant is compatible with your device and operating system. You can refer to the product manual or the [Feit Electric website] for more information on compatibility.

Why Is My Smart Light Bulb Not Working?

If your smart light bulb is not working, there might be an issue with your power source, fixture, dimmer switch, or bulb itself. You can try the following steps to fix it: 

  1. First, check if your power source is stable and sufficient for the bulb. Use a voltage tester or a multimeter to measure the voltage level at the socket. If the voltage is too low or too high, you may need to adjust your wiring or use a voltage regulator. 
  2. Next, ensure that your fixture is suitable for the bulb and allows enough air circulation and heat dissipation. You can consult the product manual or visit the Feit Electric website for more information on compatible fixtures for Feit Electric LED bulbs. 
  3. If you’re using a dimmer switch, check if your dimmer switch is compatible with your bulb and appropriately calibrated. The product manual provides more information on compatibility and calibration.
  4. Lastly, check if your bulb is still under warranty and if it is defective or damaged. If so, reach out to Feit Electric customer service for a replacement or a refund.

Why Is My Led Light Bulb Not Working?

If your LED light bulb isn’t working, it might not be for the same reasons as your intelligent light bulb. Your LED bulb could be incompatible with other bulbs in the same circuit, or it may have reached the end of its lifespan. Here are some steps you can try to fix the issue:

  1. Check if your LED bulb is compatible with the other bulbs in the circuit. Ensure they have similar wattage and voltage ratings. If they don’t, consider using separate circuits or replacing them with compatible bulbs. 
  2. Check if your LED bulb is still under warranty. If it has burned out or lost significant brightness, you can request a replacement or a refund by contacting Feit Electric customer service.

How Do I Reset My Unresponsive Smart Bulb?

To reset your unresponsive smart bulb, you can follow these steps:

  1. Turn it on for one second, then off for one second.
  2. Repeat this process three times consecutively.
  3. The bulb will flash rapidly when it is ready to be set up.

After resetting, your bulb should be ready to pair with the Feit Electric app or the voice assistant of your choice.

Final Words

There you have it, some problems you may encounter while using the Feit Electric LED Bulbs. If you have any of the issues above, ensure to try the troubleshooting steps and see if you can resolve the problem.

If none of the troubleshooting tips could help you fix the issues with your Smart Bulb, then you may replace your bulb or try contacting Feit Customer Support for help.  Click here to buy the original from Amazon